How to install SSD to quickly programs on Desktop

Installing the solid-state drive to speed up the PC takes less time to boot and load the programs. If you want your PC or laptop to work faster and efficiently you should know how to install SSD? Skillfully you will also install by using the SATA cable for SSD in your PC or desktop. Don’t undervalue SSD to quicken the modern PC or Laptop. Modern technology users desire speedy and efficient smart devices for long-run use.

SSD is quicker and different apps run faster on your laptop as well as a desktop computer than HDD. Luckily, updating the PCs is a good option rather than buying a new tech product. Keep in touch to install the solid state drive to the quick program.

How Solid state drive work to store information

Before installing take a look at Solid-state drive work to store information. SSD stores the data in solid state flash memory as a nonvolatile storage media. How many components are of solid state drive? Two components are Nand flash memory and flash controller. Basically, NAND flash memory is less expensive and faster to work. Flash controllers that handle the data of NAND flash memory.  

Moreover, the SSD is smaller and faster and works away from the spinning hard disk drive. So, the HDD is larger in physical size but also requires a place for a hard disk. Due to the component of NAND flash memory, SSD doesn’t only speed up the apps but also file writing speed.

Benefits of SSD upgrade

A solid-state drive is commonly used for business computers, offices, and low-performance computers. It shows SSDs becoming dominant on HDDs for storage and efficiency purposes. Before installing an SSD take a look at the detailed benefits of SSD upgrades. You can also connect the SATA cable for the SSD to upgrade.

High performance

Suppose you’re performing multi-tasks on PCs, laptops, and computers then how to work if device speed will be slow? Evidently, you are stuck in doing a very important task. High performance is just possible due to heavy memory. Heavy memory has the capability to access the data fast and your task will be at ease. For your heavy file data to browse, SSD performs well to fast performance.

Faster speed

Do you want to get rid of device hang issues? Basically, the world of technology is going to be faster than in the past. Estimated the coming days will be more based on technology. So it is a genuine issue to fast the speed of devices. Speed issues do not affect un-employers or average users. 

Most of the first generation of devices have the hard drive disk. Hard drive disk works for a limited time and after that time it will slow down or stop the computer. On the other side, the solid drive disk is not only small but also speeds up the function and minimizes the time of performing. 

By installing the SSD in old computers even for the first generation to high speed and fast performance.

More reliable

Reliability is the basic factor even for a minor device. But if talking about the reliability of computers or pc, then SSD is the best choice. SSD is reliable and innovative for a longer lifetime than HDDs. You can use the reliable SSD for long storage of data even for a whole lifetime because of SSD error-correcting code. To get a reliable device use the SATA cable for SSD.

Efficient in energy

How is the SSD energy efficient? HDDs are rotated in a circular motion and consume more energy. It not only affects energy consumption but also affects the battery. Moreover, SSD is reliable to consume less energy and save the battery. It is estimated that the SSD draws power about 2-3 watt and HDD about 6-7 watts. 

So, it is clear that SSD consumes more power and less battery life span of your laptop. The main reason for energy efficiency is the NAND component of the SSD. 

Heat resistance

Does the SSD help with heat resistance? As the above points clear the power draw of SSD and HDD. The SSD works fast and you complete your work fastly, so your computer will not generate much heat. Otherwise, HDD rotates in a spinning motion and consumes more energy. However, it becomes the reason for warming up the laptop, CPU, and computers. 

When your laptop is warm then it becomes slow functioning. In this instance, the SSDs are a better option to prevent heat and retain the device cooler.

Highly durable

It is the fact that the most reliable thing will be most durable but what about SSD. As all the points are clear about SSD. Surely it is clear that the SSD is also durable due to reliability, heat resistance, better performance, and high speed. HDDs are not only less durable but also damage all the systems including important data. 

Permanent damage of data for business accountants is a big loss. Factly every person just wants to recover data but does not care about the reliable drive. Thinking about SSD is a wise factor. SATA cable for SSD used to install it into secondary devices.

How to install SSD in laptop quickly

Installing the SSD in a laptop quickly is a very easy method. You should avoid touching the connectors and open the SSD before installing. Try to follow;

  1. Unplug power supply

You can install an SSD by some safety measure. Make sure to unplug the laptop from the power supply. So, why do we need to unplug the power supply before install? Due to power supply, statistical discharge may lead to damage to your laptop component as well as shock your body. Anti Statistic ESD wrist strap is preferred before installing a solid-state drive.

  1. Remove the battery

To remove hardware as well as battery, you need to unscrew the body. Most laptops are opened from beneath. After unscrewing all the lower body, now remove the battery for safety measures and put it near your hands.

  1. Remove hard drive

Now it’s time to remove the hardware. Removal of hardware is a technique. Make sure to remove all the screws and analyze the position of lifting. Before analysis, don’t take a risk and it will break the socket. At the last, put up the HDD carefully and be ready to insert the SSD.

  1. Insert SSD

If you successfully remove the hard disk drive then you will also put in the SSD in the same manner. Put the SSD and push it down until the solid-state disk attaches with the interface.

  1. Tighten the screws

Luckily after inserting the SSD, now tighten all the screws to immovable the position. You should also place the battery again on the laptop. 

How to add SSD in desktop pc quickly

SATA cable for SSD used for connection to add SSD in desktop. Let’s started;

  1. Unscrew tower case

Like a laptop, desktop pc no need to remove the battery. You should unscrew the case to recognize the hardware. Make sure to remove all the screws to prevent breakage of the cover case. Before adding SSD check the access to the SATA port of the motherboard. Before performing any task you should power off the PC and shut it down. This is necessary to prevent shock.

  1. Find the slot and Insert SSD

Before adding the SSD you should find the slot. Maybe in your motherboard, the position of the slot is different from other motherboards. Mostly you will find out two slots in this regard you can consult with your manuals for which one is the best slot. Commonly the M.2 SSD in size 80 mm is used in slots.

In the mounting bracket, you should add the SSD in the right position. Before inserting, analyze the position and then place it with related holes. The label is definitely on the upper side but put it toward the gold edge. Check the screws to flat tighten the SSD. Otherwise, the holding chip is present to perfect hold. Take off the plastic from the chip and carefully add the SSD by chip.

Moreover, some storage brackets are larger and SSD size is smaller. In this instance, you need a converter for a perfect fit. If your motherboard has standoffs then you should tighten them but not too much, for good fitting. 

  1. Connect SATA cable

SATA cable is used to install SSD (secondary device) by connecting the one end on the motherboard SATA connector and other ends with SSD. You can use the SATA power cable that is connected with your power supply to the SSD. 

  1. Disconnect HDD

You can connect the SSD then you should disconnect the HDD. So, for window installation, disconnect the HDD extra cables of the desktop pc.

  1. Insert USB for backup

For new window installation in SSD, use the USB drive and insert it in the desktop. Some keys need to be pressed and choose the USB. You can also connect the hard drive by completing the installation of window 10 to follow instructions. 

After complete installation, insert the hard drive again for backup. Obviously, you have been using the old hard disk, each file is safe on the old disk. Now you can check the important files and share the data in the SSD. You should secure the data om library feature and leave the less important data in the hard drive. As SATA cable for SSD used in desktop so, USB is used to share windows.

How to clone Windows 10 to SSD from HDD

Cloning deletes all the data and documents how to recover all the data by cloning. Before clone window 10 to SSD from HDD, make sure to check the space and data. Follow steps to backup your data;

  1. Use the USB cable to connect SSD into pc
  2. Go to “Computer Management” and click on the “Disk Management”
  3. For initialize the SSD, some partitions show, choose the same partition as the original one
  4. Click on partition and check the partition style by properties and also check the other disk to choose the “Initialize Disk” option
  5. After making sure press “OK” and download  and activate the recovery software
  6. Open the software and choose the “Source disk” and then choose the “Target disk” after tab on “Next”
  7. Mark the option of “Check the option if the target is SSD” to optimize and tap on “Proceed”
  8. Wait for a minute for cloning and then tap on “Finish”
  9. Now boot the PC or laptop from a Solid-state drive
  10. Now Restart the PC by setting the PC boot

How to clone window 10 HDD to SDD

  1. Before backup, cloning software requires and connects the HDD to the PC. Softwares like AOMEI Backupper professional editor, Acronis Disk Director12.5, Clonezilla, and EaseUS todo Backup 11.0 used.
  2. Open the “Clone” in and choose the “Disk Clone”
  3. Choose “SSD disk” in the “Source Disk Page”
  4. Now “Destination Disk” page open then choose the new HDD
  5. “Operational Summary” page open with some options “Edit Partition”, SSD alignment, and “Sector by sector clone”
  6. Select the “Sector by sector clone” for the entire drive and then tap on “Start Clone”
  7. Restart the PC


Successfully you add the Solid disk drive by useful steps of how to install SSD. Use of  USB and SATA cable for SSD mentioned for your help. Many important factors to add a solid disk drive are not ignorable. So, be careful before installing a solid-state disk. If you don’t aware of the benefits then this article shows you the many benefits of SSD.

Jami Raza

Recent Posts

How to Download No Copyright Music for Free?

Music is the one and only thing that is loved and lived by every individual.… Read More

3 weeks ago

EMEET HS150 Bluetooth Headset and Microphone Review

Bluetooth headphones work perfectly for listening to music or watching movies, but they are inferior… Read More

4 weeks ago

VOLTME GaN USB c charger 100W 65W review

In the technical world, technical accessories play a significant role in running businesses. Most importantly,… Read More

1 month ago

The answer to an extraordinary global dilemma is QA consulting

You can't go back. The world won't be the same for long. The spread of… Read More

1 month ago

A Valuable Alternative to Thunderbird – EssentialPIM Review

Thunderbird is an effective email client that has become useful as an open source, a… Read More

2 months ago

How to text someone who blocked you? 2022

Having the strongest bond with your beloved one usually comes to an end. The reason… Read More

2 months ago